How to Handle a Ship in Congested (High-Traffic) Waters?
Handling a ship in congested or high traffic areas is not an easy task. Congested waters are high-density traffic areas where a vessel is likely to collide with another vessel if ship navigation is not carried out in the right manner.
Navigation out in open sea isn’t easy either but by virtue of lesser traffic and ample sea room, it doesn’t pose as much of a threat as that posed in congested waters. Approaches such as that in Singapore or China have dense traffic in the form of fishing boats, small crafts in addition to larger merchant vessels which, by default, means that a higher degree of precaution, situational awareness, and decision making is to be exercised under such circumstances.
Factors such as the state of sea, weather, proximity of vessels, status of the ship (underway or making way, laden or under ballast condition etc), interaction with other vessels causing difference in pressure at the bow or stern, proximity to the land, steering gear effectiveness, effectiveness of the aids to navigation, rudder movement, effect of shallows are among many things that are to be adhered to. All of that aforementioned are to be applied in conjunction with COLREGs to ensure that the vessel is safely navigated into and out of the congested area. Rule 18 of COLREGs explicitly state as to which vessel is to be kept out of the way of another, which basically means that a vessel cannot bypass pre existing rules with regard to vessel responsibility.
As there are several vessels present in the vicinity, chances of a collision or any other form of an accident are very high; adherence to COLREGs in such cases is imperative in order to negate any legal liabilities that might arise due to vessel mishandling. In such conditions, the officer on watch and the ship’s master must take all the necessary precautions to avoid any kind of accident. Even in the presence of a Pilot who is, most of the times, thorough with the existing local navigational landscape, the onus of the safety of the vessel lies with the Master; to make it clearer, the presence of a Pilot does not relieve the Master and his bridge team of the obligations to keep clear of other vessels. A comprehensive passage plan along with information pulled from the Admiralty publications (prepared by the 2/O under the authority of the Master) including the presence of Aborts & Contingencies for emergency situations ensures that the whole process of safe navigation runs efficiently.
For navigating through congested waters, the officer on watch must know his duties well and be aware of the positions of ships in the vicinity and other fixed structures. He must make full preparations to sail through such areas. Practical ship handling is a skill acquired with experience, and the OOW must never hesitate to call the Master in case of the slightest doubt. After all, the Master is termed as a ‘Master’ for obvious reasons! Having said that, the following points are laid out to assist the OOW with regard to his decisions in congested waters:
- Comply with COLREGs at all times
- Be thorough with the ship’s maneuvering characteristics such as the UKC, Squat, stopping distance etc. Such details are laid out concisely in the wheelhouse poster
- Change over to hand steering
- Post additional lookouts. As stated by Rule 5 of ROR “Every vessel shall at all times maintain a proper look-out by sight and hearing as well as by all available means appropriate in the prevailing circumstances and condition so as to make a full appraisal of the situation and of the risk of collision.” (Know what are the duties of ship lookout here)
- Always keep the Master informed about the current situation and action plans. Call him if in the slightest doubt with regard to the existing situation or action to be taken
- Give the Engine Room adequate notice with regard to any requirements (maneuverability) that shall be necessary during the course of the vessel movement
- Reduce the vessel’s speed to a safe speed for navigation. Refer to Rule 6 of ROR for more clarity on ‘Safe Speed’
- Run parallel power units for steering gears for additional safety. This is to ensure that the navigation of the vessel does not come to a standstill in case one steering gear system fails. Preparedness to ensure that equipment is not liable to failure are gauged with a prior control test. The same should be applicable to the ship’s whistle which is used more often when in congested waters to warn the vessels in the vicinity of one’s own approach or presence
- Adhere to the company’s ISM checklist for navigation in confined waters
- Use all available resources including all aids to navigation and cross verify with the chart (use largest scale chart for that area) to check depths, distances, bearings etc. Monitor the position of the vessel continuously with the help of parallel indexing, ARPA etc
- Coordinate with the VTS as well as with the other ships in the vicinity using the VHF
- Record the vessel movement in the Bell Book
In case the vessel is in congested areas in restricted visibility, the associated risks increase. Rule 19 of COLREGs lays out mandatory rules with regard to navigation in RV which must be adhered to at all times. In addition to the above guidelines, the appropriate light and fog signals for a vessel in RV must be applied as well. For further reading on RV, refer to this article.
Learn all techniques to master ship navigation at the sea in our FREE eBook – A Guide to Ship Navigation Techniques
Disclaimer: The authors’ views expressed in this article do not necessarily reflect the views of Marine Insight. Data and charts, if used, in the article have been sourced from available information and have not been authenticated by any statutory authority. The author and Marine Insight do not claim it to be accurate nor accept any responsibility for the same. The views constitute only the opinions and do not constitute any guidelines or recommendation on any course of action to be followed by the reader.
The article or images cannot be reproduced, copied, shared or used in any form without the permission of the author and Marine Insight.
Do you have info to share with us ? Suggest a correction
About Author
Shilavadra Bhattacharjee is a shipbroker with a background in commercial operations after having sailed onboard as a Third Officer. His interests primarily lie in the energy sector, books and travelling.
Latest Marine Navigation Articles You Would Like:
Subscribe To Our Newsletters
By subscribing, you agree to our Privacy Policy and may receive occasional deal communications; you can unsubscribe anytime.
Web Stories
how can i download the 12 free maritime e books?
Please watch this video: https://www.youtube.com/watch?v=SxPsHzeS2ZQ
Good day, how can we say a water is congested? because might interpret as light traffic.
There isn’t a lot of substance in this article or practical help. The first thing I’d say is that in congested waters it shouldn’t be a case of calling the Master, it should have been pre determined where the Master and a helmsman is required. In seriously congested waters like the Singapore Straits, particularly approaching the anchorages you’d need a full bridge team to manage situational awareness, plus a helmsman to ensure you are ready to manoeuvre. You should have the engine ready for manoeuvring.
Planning when and where to cross is the greatest challenge and requires you to determine when ships will pass so that you can adjust your speed to cross safely. Visual identification and monitoring of the bearings of small craft is critical as when you are in busy waterways it may be difficult to acquire the smaller targets.
Also, in Singapore be ready for them to tell you to hurry up to the pilot boarding ground at exactly the same time as a number of other large ships and then want you to immediately ‘stop, stop, stop….’ organised chaos.